Global Healthcare UV Disinfection Equipment Market

Report ID : 1172 | Published : 2022-05-24 | Pages: 190 | Format: PDF/EXCEL

There is an increasing consensus that enhanced cleaning and disinfection of environmental surfaces are needed in healthcare facilities. Disinfection of environmental surfaces in healthcare facilities is considered an essential element of infection prevention programs. Ultraviolet disinfection equipment is commonly used in disinfecting materials and hospitals wards, operating rooms, and ICUs, among physical methods or no-touch technologies. UV technology is an innovative, practical, and effective widely used to sterilize medical devices and revolutionize disinfection and sterilization approaches. At present, manufacturers are focusing on the development of a UV-based disinfection trolley to fight against COVID-19 by rapid cleaning of a hospital environment. In hospitals, Speedy decontamination of the used patient-care beds and hospital rooms before admission of subsequent occupants is a foremost requirement in view of the limited availability of beds.

Growing applications of healthcare UV disinfection equipment in healthcare environments along with in the development, testing, and production of medicine, vaccines, and other medical devices and auxiliaries is further expected to boost the market growth.  The immediate demand has increased a lot with the outbreak of COVID-19. Henceforth, the market is majorly driven by the COVID-19 public health emergency along with an Increased incidence of hospital-acquired infections (HAIs) globally. Growing focus on the development of cost-effective healthcare UV disinfectant devices based on advanced technology to disinfect a more areas and a greater number of pathogens is projected to show significant market growth during the forecast period.

The Global Healthcare UV Disinfection Equipment market is categorized on the basis of product, end-user and region. On the basis of Product Type, the market is segmented into Automated and Germicidal Lamp Based. On the basis of Deployment Mode Type, the market is segmented into Mobile, Tabletop, Compact, and Wall-mounted. Based on region, the market is studied across North America, Asia-Pacific, Europe, and LAMEA. On the other hand, Asia-Pacific is expected to dominate the market during the analysis of the forecast period.

The report further identifies detailed competitive intelligence of AMENSCO MEDICAL TECHNOLOGIES, American Ultraviolet, Beijing Ikbolo, CLOROX HEALTHCARE, De Marco s.r.l., Guangdong Dongpin Beauty & Medical Technology, KOVER SRL, LIGHT PROGRESS, Lumalier, Medstar and Other Prominent Players. 


  • American Ultraviolet
  • Xenex
  • Beijing Ikbolo
  • De Marco s.r.l.
  • Guangdong Dongpin Beauty & Medical Technology
  • Lumalier
  • Medstar
  • SciCan Medical
  • Shanghai Huifeng Medical Instrument
  • Spectra254
  • Steriliz
  • Zhejiang FUXIA Equipment Co.,Ltd
  • PhoneSoap
  • CleanSlate UV
  • Other Prominent Players

Global Healthcare UV Disinfection Equipment Market Segmentation:

Global Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Product Type

  • Automated
  • Germicidal Lamp Based

Global Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Deployment Mode

  • Mobile
  • Tabletop
  • Compact
  • Wall-mounted

Global Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) Based on Region

Europe Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Country

  • U.K.
  • Germany
  • France
  • Italy
  • Spain
  • Russia
  • Rest of Europe

North America Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Country

  • U.S.
  • Canada

Asia Pacific Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Country

  • India
  • China
  • Japan
  • South Korea
  • Australia & New Zealand

Latin America Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Country

  • Brazil
  • Mexico
  • Rest of Latin America

Middle East & Africa Healthcare UV Disinfection Equipment Market Revenue (US$ Mn) and Volume (No. of Units) by Country

  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

InsightAce Analytic follows a standard and comprehensive market research methodology focused on offering the most accurate and precise market insights. The methods followed for all our market research studies include three significant steps – primary research, secondary research, and data modeling and analysis - to derive the current market size and forecast it over the forecast period. In this study, these three steps were used iteratively to generate valid data points (minimum deviation), which were cross-validated through multiple approaches mentioned below in the data modeling section.

Through secondary research methods, information on the market under study, its peer, and the parent market was collected. This information was then entered into data models. The resulted data points and insights were then validated by primary participants.

Based on additional insights from these primary participants, more directional efforts were put into doing secondary research and optimize data models. This process was repeated till all data models used in the study produced similar results (with minimum deviation). This way, this iterative process was able to generate the most accurate market numbers and qualitative insights.

Secondary research

The secondary research sources that are typically mentioned to include, but are not limited to:

  • Company websites, financial reports, annual reports, investor presentations, broker reports, and SEC filings.
  • External and internal proprietary databases, regulatory databases, and relevant patent analysis
  • Statistical databases, National government documents, and market reports
  • Press releases, news articles, and webcasts specific to the companies operating in the market

The paid sources for secondary research like Factiva, OneSource, Hoovers, and Statista

Primary Research:

Primary research involves telephonic interviews, e-mail interactions, as well as face-to-face interviews for each market, category, segment, and subsegment across geographies

The contributors who typically take part in such a course include, but are not limited to: 

  • Industry participants: CEOs, CBO, CMO, VPs, marketing/ type managers, corporate strategy managers, and national sales managers, technical personnel, purchasing managers, resellers, and distributors.
  • Outside experts: Valuation experts, Investment bankers, research analysts specializing in specific markets
  • Key opinion leaders (KOLs) specializing in unique areas corresponding to various industry verticals
  • End-users: Vary mainly depending upon the market

Data Modeling and Analysis:

In the iterative process (mentioned above), data models received inputs from primary as well as secondary sources. But analysts working on these models were the key. They used their extensive knowledge and experience about industry and topic to make changes and fine-tuning these models as per the product/service under study.

The standard data models used while studying this market were the top-down and bottom-up approaches and the company shares analysis model. However, other methods were also used along with these – which were specific to the industry and product/service under study.

To know more about the research methodology used for this study, kindly contact us/click here.

Need Complete Report ?
Our Clients